Slide Sheets

The Swift® In-Bed Repositioning System uses the UltraSlide® Bottom Sheet in conjunction with the Swift® Sliders for use with more dependent patients/residents who have little or no mobility and require extensive or total assistance for repositioning. It's Ultra Thin breathable fabrics make the device suitable to remain under the patient at all times, without any negative impact on the performance of specialty mattresses.

The Swift® Slider is a friction reducing device that remains in-situ to assist with patient/resident repositioning, boosting and turning in bed. Made with a breathable, low-friction backing it allows staff to reposition patients/residents safely and easily whilst avoiding heat build up under the patient/resident. The Swift® Sliders can be tucked in when not in use and has the visual appeal of standard bedding.

The thin profile will not impair the performance of pressure redistribution mattresses and can therefore remain on the bed when not in use (tucked in), making it readily available when needed. All Swift® Sliders are designed for both standard and bariatric use.

Full Length Swift Slider with Handles can be used to hook up to a hoist as the handles running inset down two length.

• L200 x W243cm

The Swift® In-Bed Repositioning System uses the UltraSlide® Bottom Sheet in conjunction with the Swift® Sliders for use with more dependent patients/residents who have little or no mobility and require extensive or total assistance for repositioning. It's Ultra Thin breathable fabrics make the device suitable to remain under the patient at all times, without any negative impact on the performance of specialty mattresses.

The UltraSlide® Bottom Sheet is designed using MIP's patented Smart Sheet design (Standard) and patented Envelope design (Bariatric) with an integrated low-friction panel down the centre. UltraSlide® can also be used for patients/residents who are nearly independent with bed mobility as the low-friction surface allows them to move themselves more easily in bed.

The stretch SleepKnit® construction provides a smooth surface and fits most healthcare mattress (standard & bariatric) including profiling beds & alternating air pressure reducing mattresses.

The Swift® In-Bed Repositioning System uses the UltraSlide® Bottom Sheet in conjunction with the Swift® Sliders for use with more dependent patients/residents who have little or no mobility and require extensive or total assistance for repositioning. It's Ultra Thin breathable fabrics make the device suitable to remain under the patient at all times, without any negative impact on the performance of specialty mattresses.

The UltraSlide® Bottom Sheet is designed using MIP's patented Smart Sheet design (Standard) and patented Envelope design (Bariatric) with an integrated low-friction panel down the centre. UltraSlide® can also be used for patients/residents who are nearly independent with bed mobility as the low-friction surface allows them to move themselves more easily in bed.

The stretch SleepKnit® construction provides a smooth surface and fits most healthcare mattress (standard & bariatric) including profiling beds & alternating air pressure reducing mattresses.

The Swift® In-Bed Repositioning System uses the UltraSlide® Bottom Sheet in conjunction with the Swift® Sliders for use with more dependent patients/residents who have little or no mobility and require extensive or total assistance for repositioning. It's Ultra Thin breathable fabrics make the device suitable to remain under the patient at all times, without any negative impact on the performance of specialty mattresses.

The Swift® Slider is a friction reducing device that remains in-situ to assist with patient/resident repositioning, boosting and turning in bed. Made with a breathable, low-friction backing it allows staff to reposition patients/residents safely and easily whilst avoiding heat build up under the patient/resident. The Swift® Sliders can be tucked in when not in use and has the visual appeal of standard bedding.

The thin profile will not impair the performance of pressure redistribution mattresses and can therefore remain on the bed when not in use (tucked in), making it readily available when needed. All Swift® Sliders are designed for both standard and bariatric use.

The Standard Swift Slider's central panel should support patient/resident from neck to just below the buttocks.

• 123 x 186cm 
• Instructions Insert Swift Slider Standard Length

The Swift® In-Bed Repositioning System uses the UltraSlide® Bottom Sheet in conjunction with the Swift® Sliders for use with more dependent patients/residents who have little or no mobility and require extensive or total assistance for repositioning. It's Ultra Thin breathable fabrics make the device suitable to remain under the patient at all times, without any negative impact on the performance of specialty mattresses.

The Swift® Slider is a friction reducing device that remains in-situ to assist with patient/resident repositioning, boosting and turning in bed. Made with a breathable, low-friction backing it allows staff to reposition patients/residents safely and easily whilst avoiding heat build up under the patient/resident. The Swift® Sliders can be tucked in when not in use and has the visual appeal of standard bedding.

The thin profile will not impair the performance of pressure redistribution mattresses and can therefore remain on the bed when not in use (tucked in), making it readily available when needed. All Swift® Sliders are designed for both standard and bariatric use.

• L200 x W205cm
• Instructions Insert Swift Slider Long Length

Full Length Swift Slider - The Full Length Swift Slider supports the full length of a patient/ resident.

This Anti-Slip Slide Sheet helps patients to rotate and re-position themselves easily in bed. While the slippery material enables easy turning, the sheet’s anti-slip panel prevents the patient from sliding forward or slipping out of bed.

Designed for people with good upper sitting balance only, patients also use the anti-slip glide sheet to get in and out of bed safely and independently. Thanks to the clever design and integration of an anti-slip panel, most users can manoeuvre themselves without support from a carer.

Alternatively, dependent patients can use the slide sheet with assistance from a health professional or family member.

• Anti-slip panel ensures stability
• Smooth satin material enables ease of movement
• Robust design supports frequent, long-lasting use
• Can remain under the patient
• Great for those who have difficulty turning in bed
• Comfortable and easy to use
• Washable at 30–74°C
• 100 x 100 cm

This Anti-Slip Slide Sheet helps patients to rotate and re-position themselves easily in bed. While the slippery material enables easy turning, the sheet’s anti-slip panel prevents the patient from sliding forward or slipping out of bed.

Designed for people with good upper sitting balance only, patients also use the anti-slip glide sheet to get in and out of bed safely and independently. Thanks to the clever design and integration of an anti-slip panel, most users can manoeuvre themselves without support from a carer.

Alternatively, dependent patients can use the slide sheet with assistance from a health professional or family member.

• Anti-slip panel ensures stability
• Smooth satin material enables ease of movement
• Robust design supports frequent, long-lasting use
• Can remain under the patient
• Great for those who have difficulty turning in bed
• Comfortable and easy to use
• Washable at 30–74°C
• 80 x 80 cm

The MIP Tubular Turning Slide Sheets are made from a Transtex, a specially developed fabric that is silicone coated on both sides to provide a slick, low friction finish for easy patient movement and turning. The durable fabric is suitable for hospital laundering using standard hospital laundry guidelines HSG(95)18.

•  Slide sheets are not intended for lifting, and all patient manoeuvers should be accomplished without lifting.
• Tubular Slide Sheets are formed by sewing the fabric into a continuous tube with a double sewn low profile seam that reduces potential tissue viability issues whilst adding strength and durability.
• A web hanging loop is provided to allow the tube to be kept with the patient at all times.

For all repositioning and manual handling solutions it is recommended to seek advice / approval from a manual handling expert.

The MIP Tubular Turning Slide Sheets are made from a Transtex, a specially developed fabric that is silicone coated on both sides to provide a slick, low friction finish for easy patient movement and turning. The durable fabric is suitable for hospital laundering using standard hospital laundry guidelines HSG(95)18.

•  Slide sheets are not intended for lifting, and all patient manoeuvers should be accomplished without lifting.
• Tubular Slide Sheets are formed by sewing the fabric into a continuous tube with a double sewn low profile seam that reduces potential tissue viability issues whilst adding strength and durability.
• A web hanging loop is provided to allow the tube to be kept with the patient at all times.

For all repositioning and manual handling solutions it is recommended to seek advice / approval from a manual handling expert.

The MIP Tubular Turning Slide Sheets are made from a Transtex, a specially developed fabric that is silicone coated on both sides to provide a slick, low friction finish for easy patient movement and turning. The durable fabric is suitable for hospital laundering using standard hospital laundry guidelines HSG(95)18.

•  Slide sheets are not intended for lifting, and all patient manoeuvers should be accomplished without lifting.
• Tubular Slide Sheets are formed by sewing the fabric into a continuous tube with a double sewn low profile seam that reduces potential tissue viability issues whilst adding strength and durability.
• A web hanging loop is provided to allow the tube to be kept with the patient at all times.

For all repositioning and manual handling solutions it is recommended to seek advice / approval from a manual handling expert.

The MIP Tubular Turning Slide Sheets are made from a Transtex, a specially developed fabric that is silicone coated on both sides to provide a slick, low friction finish for easy patient movement and turning. The durable fabric is suitable for hospital laundering using standard hospital laundry guidelines HSG(95)18.

•  Slide sheets are not intended for lifting, and all patient manoeuvers should be accomplished without lifting.
• Tubular Slide Sheets are formed by sewing the fabric into a continuous tube with a double sewn low profile seam that reduces potential tissue viability issues whilst adding strength and durability.
• A web hanging loop is provided to allow the tube to be kept with the patient at all times.

For all repositioning and manual handling solutions it is recommended to seek advice / approval from a manual handling expert.

Wipeclean, cushioned, and with handles, this Glide and Lock is designed for use with carers and provides constant comfort and stability when in a sitting position.

Our Wipeable Cushioned Chair Glide and Lock with handles offers a waterproof top coating with 4 way stretch properties to improve comfort for the patient and can be easily wiped down and laundered in between uses.

The additional webbing handles on each side of the Wipeable Cushioned Chair Glide and Lock with handles allow carers to help slide the patient where necessary from the sides or behind.

The Wipeable Cushioned Glide and Lock with handles are suitable for most chairs, including – static and recliner chairs, wheelchairs and sofas. Please note, the top wipeable surface is not as breathable as our standard model. However, this material is a more convenient surface for patients who may have incontinence problems or home care environments, wards area’s and other departments.

Antibacterial wipes can be used to clean the product, or it can be laundered up to 72° C and tumble dried on a low to medium heat. Chlorine bleach is not to be used.