Apollo II Dynamic Mattress System

£1,440.00
ex. VAT
( £1,728.00 inc. VAT )
Product Code RRP Price
DYN/DIG/APOLLO
Apollo II Dynamic Mattress System

Item eligible for vat exemption

£2,889.00 £1,440.00
VAT Relief Regulations Returns Policy
Please enter quantity.
Variants
Product Price
THEIA-PUMP-2+AIR-MAT BUNDLE DEAL - Air on Air Active Mattress System with Theia Digital Pump £375.00
AIR-MAT Air on Air Active Mattress System (Mattress Only) £332.00
FULL-MAT Air on Foam Active Mattress System Only (to be used with Theia Pump) £294.00
ALT-9300 Alerta Bariatric 2 Replacement System £1,850.00
ALT-5000 Alerta Sensaflex 5000 Memory Foam & SensaGel Heel Slope Mattress with Side Supports - VERY HIGH RISK £300.00
APOLLO-2-PUMP Apollo Pump Unit Only £750.00
DYN-DIG-ARTEMIS-2 Artemis High Specification Dynamic Mattress System £1,650.00
DYN/DIG/ATHENA Athena Low Air Loss Dynamic Mattress System £3,945.00
DYN/DIG/ATLAS Atlas Automatic Dynamic Mattress System £1,650.00
DYN-DIG-AUTO-ONE Auto One Mattress System £635.00
DYN/DIG/BAR/2 Bariatric II Dynamic Mattress System £5,575.00
DYN-DIG-PMP-BA Bariatric II Pump Unit Only £850.00
DDOMUS-3D Domus 3D Mattress System 8" £450.00
DDOMUS04-2019 Domus 4 V2 Mattress System - Higher Spec (Twist CPR, Welded Seams, Heel Relief) £575.00
DDOMUSA-2019 Domus Auto Mattress System £575.00
DDOMUA01-90cm Domus Auto V1 Mattress System - Pull Tags £525.00
9C077093 Domus Bariatric Auto System - 120cm (4ft) - Higher Spec £1,250.00
DPRO-TURN Optima Turn Mattress System 85cm £1,950.00
HR800 Rotational Turning Active Dynamic Mattress System £3,460.00
1001050003 Simple Plus Bariatric Dynamic Mattress System 300kg (Digital Pump) £1,155.00
1001050004 Simple Plus Bariatric Dynamic Mattress System 400kg (Digital Pump) £1,295.00
THEIA-PUMP-2 Theia Digital Pump Unit Only £154.00

The clinically advanced Apollo II family of dynamic pressure area care surfaces have been designed to offer dual therapy modes to enhance patient care and outcomes. Developed for use in hospital, residential and home care environments, the Apollo II mattress is fully EN 60601-1, EN 60601-1-2 and EN 60601-1-11 compliant.

Offering dual therapy modes; Alternating Therapy Mode - providing pressure relief over a 10 minute cycle in a AB (2 in 1) pattern. Constant Low Pressure (CLP) Therapy Mode - creating a static low pressure surface allowing immersion into the mattress providing pressure redistribution.

  • Max Inflate Mode automatically inflates all cells to the maximum pressure setting for 20 minutes. This can be beneficial when moving or repositioning a patient.

 

  • Automatic Pressure Control System monitors and adjusts the mattress pressure to maintain pressures at the set level.

 

  • Comfort control settings can be adjusted to ensure maximum user comfort. The default setting is 3 (1 is soft and 5 is firm).

 

  • The Apollo II pump automatically detects which compatible dynamic surface has been connected and will adjust the pressure setting accordingly.

 

  • Audible and visual alerts for low pressure or power failure.

 

  • Auto lockout - the pump will lockout after 2 minutes of inactivity to prevent accidental setting changes. An amber light indicates that the pump controls are locked.

 

  • Mute button - once the audible alert has been acknowledged the alert can be muted whilst the cause is investigated.

 

  • Accessible rear filter for ease of maintenance.

 

  • Integral hanging hooks enable the pump to be suspended from the bed footboard.

 

  • Fully EN 60601-1, EN 60601-1-2 and EN 60601-1-11 compliant.

 

  • The mattress includes 20 cells consisting of 3 static head cells and 17 alternating cells. Individual cell's 'air on air' construction reduces the risk of 'bottoming out' as the lower section of each cell remains inflated to provide a supportive base.

 

  • The Apollo II mattress features a CPR dial at the footend, which allows for rapid deflation and is easy to operate in the event of an emergency. It is positioned flush against the mattress to reduce risk of accidental operation or damage and is strategically located to allow ease of access.

 

  • A Transport Mode facility is achieved by sealing the connector on the umbilical cord with the transport cap. The Transport Mode can be used for up to 8 hours to ensure that the support surface provides pressure redistribution in power outages or when transportation is required.

 

  • The top Dartex® covers are multi stretch, water resistant and vapour permeable.*

 

  • An anti-fungal agent is encapsulated in the covers to help control microbial deterioration. They feature a white inner substrate to assist in identifying signs of cover damage and strike-through. Additionally, the Apollo II mattress bottom cover includes a cable management system to safely route the power cable and reduce the risk of a trip hazard.

 

  • A 360° zip allows ease of access to the internal cells and the welded seams and waterfall flap reduce risk of fluid ingress.

 

  • The mattress has 8 strategically positioned straps with D rings to enable them to be easily secured to a range of bed frames (moveable parts only).

10 mins
2 Years (Full Parts & Labour)
200kg (31.5st)
At High Risk
360 degrees with protective flap
BS7175:1989
Dartex Multi-stretch, Water Resistant, Vapour Permeable
1 in 2 (AB Pattern)

 

Dimensions - Basic

88cm
20cm
200cm
 

Dimensions - Bed

20.5 x 28 x 11.5cm
 

Specification - Weights

12.3kg (pump 2.3kg & mattress 10kg)

Newsletter